Azimuth, Elevation, Skew/Tilt are
the gauges needed when finding a signal.
They are built into the stand & because of
their accuracy you will have a strong signal
within 5 minutes
EVERYTIME!
Specifications for
1-5/8 inch Model
- Material is Nylon 6 with some
parts having glass added for additional strength
- Minimum Height 21 inches
without extension*
- Maximum Height 36 inches with
extension*
- Base is 17 in long x 14 in
wide x 1 in thick
- Weight 10 lbs
*With legs set at
the normal height of 2 inches |
 |
|
Click
for Larger
Image |
"PDQ
Stand" 1-5/8 Model consists of:
Base Unit Assembly
- 4 Legs - Extension - Mast Assembly - Post
Base Unit Assembly:
- Base with a 360 degree
rotating Azimuth Base
- Built in Compass
- 14 in diameter Azimuth
Ring each mark being a single degree
- Directional Pointer
- Weight Holders
- Locking
Knob
|
 |
|
Return to Top |
Click for Larger Image
|
Legs:
- Four ¾ inch Nylon
threaded rods that can use off the shelf ¾-10
inch nylon nuts.
- By having 10 turns per
inch it is easy to adjust the stand to assure
that it is level.
- There are two nuts, one
on each side of the base, finger tighten to
secure the legs to the base.
- Having threaded rods
with adjusting nuts allows for easy elevation
adjustment.
- And quick removal for
more compact storage.
|
 |
|
Return to Top |
Click for Larger Image
|
Extension:
Mast:
|
- Bottom section keyed to
base or extension, has indicator for Elevation
gauge.
- Middle section has
elevation reading and indicator for skew/tilt
gauge.
- Top section keyed to
post has skew/tilt gauge.
- Two stainless steel
bolts with handled nuts connect the three
sections
|
 |
|
Return to Top |
Click for Larger Image
|
Post:
|
